☰

中钨在线新闻网

Tungsten Fishing Beads

Category: Tungsten Information
Published on 08 October 2014

Tungsten fishing beads are standard in the industry and have been worked into almost every famous bead pattern available on the market.

Tungsten fishing beads are made of tungsten, which is considerably heavier than lead, are used not only to provoke the fish to bite, but also to force the fly to sink the bottom. On standard bead heads there is one small and one large bored-out hole to help to slide it easily around the hook bend and fit snuggly behind the hook eye.

Tungsten fishing beads are made exclusively for fly tiers using a "duel-diameter" hole. One small and one large bored-out hole to help slide easily around the hook bend and fit snuggly behind the hook eye. These beads are plated to resist tarnishing and provide flash even in the most stained of waters.

All serious fly fishermen know that having tungsten fishing beads, flies works wonders for catch rates when fishing fast, clear streams. They also work wonders in any other deep water situation! Get the flies to the bottom where the fish are and you just HAVE to catch more fish!

Reasons to choose tungsten as material of fishing beads

Tungsten is one of the heaviest metals available. It is so heavy that can be used in making in tungsten fishing beads. Tungsten has a density of rages from 16.5 grams/cm3 to 18.5 grams/cm3 near room temperature, in comparison, lead only has a density of 11.34 grams cm-3.As a result, tungsten fishing beads are almost twice as heavy as lead in the same volume.

tungsten-fishing-beads


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Tungsten Screw-In Weight

Category: Tungsten Information
Published on 30 September 2014

On the bottom of the tungsten screw-in weight is a stainless steel corkscrew device which makes it easy to thread on plastic bait and hold it in place next to the weight, thus eliminating the need to peg the weight which can cause line damage. Nearly all of bullet weights screw-in weights include a plastic insert that is essential to prevent the line from twisting around the corkscrew which can cut the line when applying the bait or at hook set.

All of the anglers who are experienced know the materials difference, they all agree with the view point that hard metal can give you over softer like tungsten. Tungsten with high density will let you feel clearly distinguish between bottom compositions, such as gravel, rock, mud, and wood when you drag a tungsten weight along the bottom, of which the other conventional bullet weight such as lead ,brass ,steel or any other materials made bullet weights can not do. What is more, the smaller diameters of tungsten screw-in weight allow slipping through snags much more easily than lead or brass.                                                                                                                  

Tungsten screw-in weight are available in natural, watermelon, transparent red, transparent purple and black colors, of which will be useful in attracting fishes.

Tungsten-Screw-in-Weight


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Tungsten Bar Surface State

Category: Tungsten Information
Published on 29 September 2014
The appearance of tungsten bar, tungsten rod, turns to be metallically gray or dark gray. Hygroscopy is not allowed on the appearance of W1 ,W2, and W3 tungsten bar, tungsten rod.
 
Any oxidation, contamination, and severe excessive fusion, bubbling, delamination, or crack is not allowed for product W1. Camber should be no more than 10mm. Any excessive fusion, bubble, delamination, crack, surface bulky crystallization or severe oxidation &contamination are not allowed for products W2 and W3. The length of the spalls should not be more than 8mm, width no more than 3mm, depth no more than 1mm; The diameter of mechanical pitting should not be more than 1mm, depth no more than 0.5mm; Camber should be no more than 4mm. Any oxidation or contamination is not allowed for product w4.
 
tungsten bar surface state
 
Tungsten has about the same electrical conductivity and resistivity, coefficient of thermal expansion, and about the same resistance to corrosion by mineral acids as molybdenum.  Tungsten is high strength at temperatures above 2,000°F, but because the melting point is higher, it retains significant strength at higher temperatures. The elastic modulus for tungsten is about 25% higher than that of molybdenum, and its density is almost twice that of molybdenum. All commercial unalloyed tungsten is produced by powder-metallurgy methods; it is available as rod, wire, plate, sheet, and some forged shapes. For some special applications, vacuum-arc-melted tungsten can be produced, but it is expensive and limited to relatively small sections.
 
 
Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten Bar Physical Properties

Category: Tungsten Information
Published on 29 September 2014

Tungsten bar has the highest melting point of any metal of approximately 3422 degrees Celsius, but with the lowest vapor pressure. Especially, tungsten bar has very high densitys, high temperature resistance, non-toxic, etc .

Density:≥19.20 g/cm³

Purity:≥99.95%

Surface condition:black-faced ,polished sruface  

Appearance of tungsten bar: The appearance of tungsten bar turns to be metallically gray or dark gray. Hygroscopy is not allowed on the appearance of W1 ,W2, and W3 tungsten bars.  

Tungsten bars stock are manufactured from high purity tungsten powder. Because of the special properties of tungsten, these rods and bars have many applications such as welding electrodes and electrical contacts.  

PHYSICAL PROPERTIES OF TUNGSTEN BAR

Density

19.17 g/cm3

Melting Point

3410oC

Electrical Conductivity

31% IACS

 

tungsten bar physical properties

 

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten Bar Types

Category: Tungsten Information
Published on 29 September 2014

Tungsten bar includes tungsten rod, tungsten steel bar, tungsten rod, tungsten sintered bars and more, which is mainly used to found ingredient of material, cutter and heads, tungsten wire for lights instruments, electric contact points and conductor of heat, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistant steel.

Tungsten bar with impurities is used to produce bulb filaments or electron tube filaments, which are guaranteed to have remarkable resistance to high temperature. Tungsten is a naturally occurring metal mined from the earth. In this raw form, tungsten can be very brittle. In general, tungsten bar can be divided into three types.

Type Diameter1
(mm)		 Length1
(mm)		 Diameter2(mm) Length2
(mm)
Sintering Bar 12×12 400 15×15 550
Forged Bar 12×12 400 15×15 550
Ground Bar 12×12 400 15×15 550

tungsten bar types

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten Bar Grades

Category: Tungsten Information
Published on 29 September 2014

Tungsten bar grades can be dicided by the content the purity of tungsten.

GRADE

 W1 W2 W3 W4
Purity (%) min. W 99.95 99.95 99.70 99.00
IMPURITY (ppm) max. Fe 50 50 100 500
Ni 30 30 50 3000
Al 20 20 50 50
Si 30 30 100 100
Ca 30 30 50 50
Mg 20 20 50 100
Mo 100 100 2000 2000
P 10 10 20 50
C 50 80 100 100
O 30 30 50 80
N 30 30 --- ---
Pb 1 1 1 10
Bi 1 1 1 10
Sn 3 3 3 10
Sb 10 10 10 10
As 20 20 20 20
Application   Tungsten-base alloy Material Processing Material Processing Material Alloy Addition

 

tungsten bar grade

 

Grades WB-1 WB-2 WB-3 WB-4 Typical-1 Typical-2
Impurities
%,max		 Pb -- -- -- 0.001 -- 0.001
Bi -- -- -- 0.001 -- 0.001
Sn -- -- -- 0.001 -- 0.001
As -- -- -- 0.002 -- 0.001
Fe 0.005 0.005 0.010 0.05 0.005 0.020
Ni 0.003 0.003 0.005 0.30 0.002 0.005
Al 0.002 0.002 0.005 0.005 0.001 0.003
Si 0.003 0.003 0.010 0.010 0.0015 0.002
Ca 0.003 0.003 0.005 0.005 0.002 0.005
Mg 0.002 0.002 0.005 0.010 0.001 0.001
Mo 0.010 0.010 0.20 0.20 0.003 0.050
P 0.001 0.001 0.002 0.005 0.001 0.001
C 0.005 0.008 0.010 0.010 0.003 0.003
O 0.003 0.003 0.005 0.008 0.003 0.008
N 0.003 0.003 -- -- 0.003 --
Sb -- -- -- 0.001 -- 0.0005
Uses Material for making tungsten alloy For Processing material For processing material For processing material For processing material For alloy additive

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Tungsten Flipping Weight

Category: Tungsten Information
Published on 29 September 2014

Tungsten flipping weight have smooth curved edges with shape of a cross between a bullet and a little ball, so that the line can't snap on high impact hook sets. Flipping weights feature for insert-free technology, so that you don't have to use toothpicks.

Tungsten flipping weight are very sensitive, you can feel even little tick of the bottom and you can even feel the bottom soft or hard .The weights come in sliding and screw in versions as well.

Tungsten flipping weight are perfect for any type of Texas or Carolina rig application. Tungsten flipping weight are great for punching through heavy cover and are available in both natural and black colors.

Tungsetn-flippin-weight


Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

99.98% Tungsten Bar

Category: Tungsten Information
Published on 28 September 2014
Purity:  W≥99.98%
Dia. :17.5mm
Length :720-750mm
Application: Mainly used to found ingredient of material, cutter and heads, conductor of heat,as the material and additive, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistent steel and electrode, mainly used to guns, artillery,rockets, satellite,airplane and ship.
 
Chemical Composition (%)
 

Main Comp.W≥99.98

Other Content≤

Fe

0.0026

Al

0.0006

Si

0.001

Ca

0.001

Ni

0.0009

O

0.0018

Cu

0.0005

N

0.0015

Pb

0.0001

Sn

0.0001

Sb

0.001

As

0.001

Cd

0.0001

Mg

0.0006

C

0.002

Bi

0.0001

Mo

0.003

-

-

99.98 tungsten-bar

 

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

99.97% Tungsten Bar

Category: Tungsten Information
Published on 28 September 2014
Grade:W-1
Purity: W≥99.97% 
Appearance: Shine with grey or dark grey metallic luster. 
Application: Mainly used to found ingredient of material, cutter and heads, conductor of heat,as the material and additive, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistent steel and electrode, mainly used to guns, artillery,rockets, satellite,airplane and ship.
 
High purity tungsten bar specification (%) 
 
Main Comp.W≥99.97
Al 0.001 Si 0.0017 Mg 0.0006
Ni 0.001 O 0.002 C 0.002
N 0.0015 Pb 0.0001 Bi 0.0001
Sb 0.001 As 0.001 Mo 0.08

99.97 tungsten-bar

 

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

99.96% Tungsten Bar

Category: Tungsten Information
Published on 28 September 2014
Grade:W-1
Purity: W≥99.96% 
Appearance: Shine with grey or dark grey metallic luster. 
Application: Mainly used to found ingredient of material, cutter and heads, conductor of heat,as the material and additive, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistent steel and electrode, mainly used to guns, artillery,rockets, satellite,airplane and ship.
 
High purity tungsten bar specification (%) 
 
Main Comp.W≥99.96
Other Content≤ Fe 0.0045 Al 0.0005 Si 0.0015 Mg 0.0006
Ca 0.001 Ni 0.002 O 0.0025 C 0.002
P 0.0008 N 0.002 Pb 0.0001 Bi 0.0001
Sn 0.0001 Sb 0.001 As 0.001 Mo 0.01

99.96 tungsten-bar

 

 

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
 

Page 881 of 1117