Throwing Dart Tips
- Category: Tungsten Information
- Published on 06 February 2015
There are a number of basics to keep in-mind when you start throw dart. A steady Stance is very important. Don't lean way over the line to get closer to the board. This one is a tough habit for some people to beat, but to try, as leaning robs the darter of stability. The feet and legs should be positioned in a solid, comfortable, and relaxed stance, with weight distributed to both feet. Excessive leaning places nearly all of the body weight on one foot, tiring the shooter in long matches and damaging accuracy in the short run.
The few inches gained by leaning over the line are simply not worth the huge loss of balance and stability. Plus, leaning lowers the shoulder, forcing one to throw upwards, fighting gravity. Leaning also usually means tensing the major muscles of the body to preserve balance. This often results in a jerky release and poor follow-through, since the body is already off-balance.
A number of long-time players report back, knee, ankle, and foot pain, from spending many years standing on one foot while playing darts. Even in the short run, leaning to throw will cause minor pain in the small of the back. Especially for older players, a firm stance will stop this discomfort.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Habits Sould Avoid
- Category: Tungsten Information
- Published on 06 February 2015
Keep your feet planted solidly on the floor, and avoid lunging, rocking, or lifting the back foot off the floor during the dart toss.Imagine that you are bowling, you still must follow-through! The same applies to Golf, Billiards, Basketball, and most every other sport. Follow-through after releasing the dart, ending up with your fingers fully extended, as though touching the spot that you want to hit.
Leaning, or rocking, is often done in an attempt to get a harder throw. The dartboard really does not care how hard you throw the dart. The only important thing is how accurately you throw it.!
Even a light throw, if accompanied by a smooth and extended follow-through, will easily reach the dart board and score.
Such wasted motion can really be a bad habit, as it affects the entire body and throw. Lifting the foot even partway from the floor deprives the body of good balance during the crucial moment of follow-through. The strength required to reach the board with any normal dart is minimal, and for best accuracy should be provided only by the fingers, wrist, and forearm. After the dart leaves your hand, let your hand and arm continue on towards the dartboard, ending with full extension, and the fingers pointing at the target.
Missing the board or hitting too low often cause beginners to think that more power is needed. This is rarely true, as one can tell by the fact that the missed darts usually hit hard enough to stick in the wall, which is quite a bit harder than a bristle dartboard. The problem lies with the accuracy of the throw and follow through. Even small children can be taught to throw accurately without lunging or using the shoulders in a throw.
If you feel short of power, stand upright, and keep your elbow up. The upper arm should be approximately parallel to the ground. This allows you to bring your arm back further, without hitting yourself in the face with the dart!
Stand Straight, Elbow Up, and you will effectively double the power of your throw without any extra effort. For one thing, the dart is much higher than when leaning, so gravity does much of the work for you.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Ammonium Paratungstate Application
- Category: Tungsten Information
- Published on 06 February 2015
Ammonium paratungstate is produced separating tungsten from its ore. Once the ammonium paratungstate is prepared, it is heated to its decomposition temperature, 600 °C. Left over is WO3, tungsten(VI) oxide. From there, the oxide is heated in an atmosphere of hydrogen, reducing the tungsten to elemental powder, leaving behind water vapor. From there, the tungsten powder can be fused into any number of things, from wire to bars to other shapes.
Mainly used in the manufacture of tungsten metal powder like tungsten trioxide or tungsten blue oxide;the downstream products of metallic tungsten powder have tungsten material series, such as tungsten, tungsten and other electric vacuum materials; there are alloy series too, such as tungsten carbide alloy blade, alloy drill, alloy molds, etc.; and other wear, pressure, temperature and other machinery and equipment components.
Tungsten Powder Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-powder.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
The Preparation of APT With High Purity(二)
- Category: Tungsten Information
- Published on 06 February 2015
Two new technologies,i.e. mechanical activating caustic decomposition and removing molybdenum from tungstate solution by ion exchange method are used in this technological process for treating low grade tungsten concentrate with a low concent of WO3 and a high content of calcium and impurities to produce APT of high purity. The combination of whole technological process is reasonable and has the advantages of shorter high recovery of tungsten and high purity of product.
This technological process effectively utilized the resources flow grade tungsten concentrate with a high content of calcium and impurities in China and extended the utilization factor of mineral resources. The production cost is low . According to the statistical results of Siquan Chemical Industril Plant in 1992, additional profit of 5800 Yuan per t on APT may be obtained. Therefore, the social and economical benefits are obvious.
Tungsten Powder Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-powder.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
The Preparation of APT With High Purity(一)
- Category: Tungsten Information
- Published on 06 February 2015
The (NH4 )2WO4 solution obtained from removing molbdenum process is evaporated and crystallized to produce APT of high purity. The content of WO3 in APT is 88. 6~ 89. 3% ,and the content of main impurities (×10-6) is: Al<5, Bi<1, Ca<10, Cd<5, Co<5, Cr<5, Cu<5, Fe<5, Mg<5, Mn<3, K<10,Na<10,Mo≈20,P<3,As<5, Si<5, reaching GB10116-88AP T-0g rade standard. It is necessary to point out that the total crystallization efficiency of APT is about 98.4% ,and the first crystallization efficiency is about 92% .The content of molybdenum in second crystallization product of APT is 0.002~0.008% ,and it maybe merged into the first crystallization product in commerce. Thus the direct recovery of APT product is more than that inthe traditional process.
Tungsten Powder Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-powder.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Bristle Dartboard
- Category: Tungsten Information
- Published on 06 February 2015
Bristle dartboard are made of natural sisal rope fiber is from the leaves of the Agave plant ,the same plant species from which tequila is made.
These rope fiber are compressed under tons of pressure, and with steel, and banded to a non-warping backboard.
The difference between a wound paper (or cork), bristle dartboard is retrieved from the board, the bristle will close the hole made by the dart. The other boards just leave the hole. This leads to faster wear and tear.
The bristle dartboard hangs from the hook and the thickness of the dartboard is divided into the following general criteria.
Regulation-Style Side
1.1 / 2 inch (14mm), generally used for small size dartboard.
2.5 / 8 inch (17mm), generally used for small size dartboard.
3.1-inch (26mm), generally used for 15-inch darts.
4.1 1/8 inch (28mm), generally used for 18-inch paper and flocked dartboard.
5.1 1/2 inch (38mm), generally used linen dartboard.
Another wooden box dartboard. According to dart over different specifications,
configure the appropriate size wooden carton. It is a decorative and protective.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Standard Enthalpy of Formation APT
- Category: Tungsten Information
- Published on 06 February 2015
Monoclinic ammonium pararungstate,(NH4)10H2W12O42H2O(s), is an essential intermediate compound in the extration of tungsten from its ores. The knowledge of the properties of ammonium paratungstete is desiable for controlling its crystallization and its thermal decomposition .However ,the study on the thermodynamic properties has not been reported . in the present work ,the enthalpy of reaction for the thermal decomposition of ammonium pararungstate was measured , and its standard enthalpy of formation at 298.15K is obtained .
Tungsten Powder Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-powder.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Wooden Dartboard
- Category: Tungsten Information
- Published on 06 February 2015
Before the First World War, pubs in the United Kingdom had dartboards made from solid blocks of wood, usually elm.[citation needed] They had to be soaked overnight to heal the holes made by the darts, and it was a messy business for the publican, although darts was a popular game. This changed when a company called Nodor, whose primary business was making modelling clay (which has no odour, hence the name Nodor), started producing clay dartboards in 1923.
You never see these around, but they are a lot of fun to throw with. They are made of lightweight wood shaft with turkey feather flights (no parts to replace). I have four sets and I ordered from Al's American Darts for using with their wooden dartboard. They weigh around 12 grams so they really aren't that much lighter than electronic darts. They work just fine with any bristle board.
A regulation board is 17 3⁄4 inches (451 mm)in diameter and is divided into 20 radial sections. Each section is separated with metal wire or a thin band of sheet metal. The best dartboards have the thinnest wire, so that the darts have less chance of hitting a wire and bouncing out.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Plastic Dartboard
- Category: Tungsten Information
- Published on 06 February 2015
Plastic dartboard, also known as soft dartboard. The material is hard plastic. Designed with a plurality of apertures onto the target with the darts, plastic tip darts are used. This is high security darts, but darts have worse feeling. It is lack of realism and easy to play darts off.
There are simple and electronic scoring. Electronic scoring type is higher price, the current penetration rate is low. Soft dart is slightly larger than the hard dartboard specifications.
The board is made of plastic facings with small holes. The holes slant out, allowing the plastic-tippeddarts to stick inside. When a dart strikes the board, the section makes contact with a metal plate,telling the computer where the player has thrown.
Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn
Linen Dartboard
- Category: Tungsten Information
- Published on 06 February 2015
Linen dartboard with sisal as material, which is widely used in international competition darts target species.
It has good throwing feelings, healed holes, basically no trace. It, higher costs and a high-end dartboard, only has 18 inches.
Despite widespread belief that some dartboards are constructed using pig bristles, camel hair, or horse hair, there is no evidence that boards have ever been produced commercially from these materials.

Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email:
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

