The latest price of Φ2.4x150mm cerium tungsten electrode is USD 1.90/PC on October 29, 2024, EXW XIAMEN, CHINA.

What is Cerium Tungsten Electrode?

Cerium tungsten electrode (WC20) is alloyed with about 2% cerium oxide. It is a non-radioactive, refractory or non-consumable metal electrode material, which is the preferred substitute for thorium tungsten electrodes. Regular diameter of the electrode is between 0.5mm and 12.0mm, and the length is 150mm and 175mm.

Characteristics of Cerium Tungsten Electrode

The addition of this small percentage of cerium oxide increases the electron emission qualities of the electrode which gives them a better starting characteristic and a higher current carrying capacity with no spitting. With the increase of cerium oxide content, the ablation resistance and arc starting of cerium tungsten electrode will increase; with the increase of use time, the welding performance will gradually decrease.

Cerium Tungsten Electrode Applications

The electrode has excellent arc starting properties at low current, and can operate successfully with AC or DC electrode negative. If used on higher current applications, the cerium oxide may be concentrated to the excessively hot tip of the electrode. In addition, WC20 is also used in inert gas shielded arc welding, hydrogen atom welding, argon arc surfacing, pulse argon arc welding, plasma welding, plasma cutting, plasma spraying, plasma melting, etc. The welding materials can be carbon steel, stainless steel, silicon copper, copper, bronze, titanium and so on.

More product details please visit:http://www.tungsten.com.cn/cerium-tungsten-electrodes.html

The latest price of Φ2.4x150mm cerium tungsten electrode is USD 1.90/PC on September 19, 2024, EXW XIAMEN, CHINA.

What is Cerium Tungsten Electrode?

Cerium tungsten electrode (WC20) is alloyed with about 2% cerium oxide. It is a non-radioactive, refractory or non-consumable metal electrode material, which is the preferred substitute for thorium tungsten electrodes. Regular diameter of the electrode is between 0.5mm and 12.0mm, and the length is 150mm and 175mm.

Characteristics of Cerium Tungsten Electrode

The addition of this small percentage of cerium oxide increases the electron emission qualities of the electrode which gives them a better starting characteristic and a higher current carrying capacity with no spitting. With the increase of cerium oxide content, the ablation resistance and arc starting of cerium tungsten electrode will increase; with the increase of use time, the welding performance will gradually decrease.

Cerium Tungsten Electrode Applications

The electrode has excellent arc starting properties at low current, and can operate successfully with AC or DC electrode negative. If used on higher current applications, the cerium oxide may be concentrated to the excessively hot tip of the electrode. In addition, WC20 is also used in inert gas shielded arc welding, hydrogen atom welding, argon arc surfacing, pulse argon arc welding, plasma welding, plasma cutting, plasma spraying, plasma melting, etc. The welding materials can be carbon steel, stainless steel, silicon copper, copper, bronze, titanium and so on.

More product details please visit:http://www.tungsten.com.cn/cerium-tungsten-electrodes.html

The latest price of Φ2.4x150mm cerium tungsten electrode is USD 1.90/PC on September 9, 2024, EXW XIAMEN, CHINA.

What is Cerium Tungsten Electrode?

Cerium tungsten electrode (WC20) is alloyed with about 2% cerium oxide. It is a non-radioactive, refractory or non-consumable metal electrode material, which is the preferred substitute for thorium tungsten electrodes. Regular diameter of the electrode is between 0.5mm and 12.0mm, and the length is 150mm and 175mm.

Characteristics of Cerium Tungsten Electrode

The addition of this small percentage of cerium oxide increases the electron emission qualities of the electrode which gives them a better starting characteristic and a higher current carrying capacity with no spitting. With the increase of cerium oxide content, the ablation resistance and arc starting of cerium tungsten electrode will increase; with the increase of use time, the welding performance will gradually decrease.

Cerium Tungsten Electrode Applications

The electrode has excellent arc starting properties at low current, and can operate successfully with AC or DC electrode negative. If used on higher current applications, the cerium oxide may be concentrated to the excessively hot tip of the electrode. In addition, WC20 is also used in inert gas shielded arc welding, hydrogen atom welding, argon arc surfacing, pulse argon arc welding, plasma welding, plasma cutting, plasma spraying, plasma melting, etc. The welding materials can be carbon steel, stainless steel, silicon copper, copper, bronze, titanium and so on.

More product details please visit:http://www.tungsten.com.cn/cerium-tungsten-electrodes.html

The latest price of Φ2.4x150mm cerium tungsten electrode is USD 1.90/PC on August 28, 2024, EXW XIAMEN, CHINA.

What is Cerium Tungsten Electrode?

Cerium tungsten electrode (WC20) is alloyed with about 2% cerium oxide. It is a non-radioactive, refractory or non-consumable metal electrode material, which is the preferred substitute for thorium tungsten electrodes. Regular diameter of the electrode is between 0.5mm and 12.0mm, and the length is 150mm and 175mm.

Characteristics of Cerium Tungsten Electrode

The addition of this small percentage of cerium oxide increases the electron emission qualities of the electrode which gives them a better starting characteristic and a higher current carrying capacity with no spitting. With the increase of cerium oxide content, the ablation resistance and arc starting of cerium tungsten electrode will increase; with the increase of use time, the welding performance will gradually decrease.

Cerium Tungsten Electrode Applications

The electrode has excellent arc starting properties at low current, and can operate successfully with AC or DC electrode negative. If used on higher current applications, the cerium oxide may be concentrated to the excessively hot tip of the electrode. In addition, WC20 is also used in inert gas shielded arc welding, hydrogen atom welding, argon arc surfacing, pulse argon arc welding, plasma welding, plasma cutting, plasma spraying, plasma melting, etc. The welding materials can be carbon steel, stainless steel, silicon copper, copper, bronze, titanium and so on.

More product details please visit:http://www.tungsten.com.cn/cerium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on August 8, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on July 25, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on July 9, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on June 26, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on June 12, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html

The latest price of φ3.20x175mm 2% yttrium tungsten electrode is USD 2.40/PC on May 27, 2024, EXW XIAMEN, CHINA.

What is Yttrium Tungsten Electrode?

Yttrium is a lanthanide metal found in most rare earth minerals, especially yttrium tantalite. It can be used as the yttrium phosphor to produce the red color on television screens and monitors and used as a superconductor and as a component of X-ray filters and superalloys. When added to tungsten as a rare earth element, it can be used as a welding electrode.

Among the non-consumable electrodes, the yttrium tungsten electrode is the most consistent, so it is often used to weld steel structures and non-ferrous alloys such as carbon steel, low alloy steel, copper, titanium, stainless steel, etc. under direct current/DC. This type of electrode arc beam is slender and has a large degree of compression, and its penetration is the largest in medium and large currents. Thanks to these characteristics, it is especially popular in the military industry and aerospace industry.

Yttrium tungsten welding electrode contains 1.8-2.2% yttrium oxide, and the electron escape work is 2.8-3.2ev. They are marked WY-20 (navy blue) according to international marking. Among the components of the WY20 electrode, there are silicon, molybdenum, manganese, sulfur, carbon, and phosphorus. When the impact hardness is 100 J/cm2, the surfacing coefficient is 9.5 h/Ah. One of the characteristics of domestic electrodes is the need for short arc processing and pre-baking. The last is done in a dedicated furnace for an hour.

More product details please visit:http://www.tungsten.com.cn/yttrium-tungsten-electrodes.html