Scheelite often occurs in tin-bearing veins and is always found in association with gold. Fine crystals have been obtained from Caldbeck Fells in Cumbria, Zinnwald/Cínovec and Elbogen in Bohemia, Guttannen in Switzerland elsewhere. At Trumbull in Connecticut and Kimpu-san in Japan large crystals of scheelite completely altered to wolframite have been found: people from Japan have been called “reinite.”

Scheelite was first described in 1781 for an occurrence in Mount Bispbergs klack, Dalarna, Sweden, and named for Carl Wilhelm Scheele. Because of its unusual heaviness, it had been given the name tungsten by the Swedes, meaning “heavy stone.” The name was later used to describe the metal, while the ore itself was given the name scheelite.


Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

Scheelite is a calcium tungstate mineral with the chemical formula CaWO4. It is an important ore of tungsten.Here are some descriptions about the Tungsten Scheelite.

Tungsten's crystals are in the tetragonal crystal system, appearing as dipyramidal pseudo-octahedra.There are some colors included,such as orange,yellow,brownish green and pinkish and colorless.Scheelite possesses distinct cleavage and its fracture may be subconchoidal to uneven. Its specific gravity is high at 5.9–6.1 and its hardness is low at 4.5–5.Aside from pseudo-octahedra, scheelite is thought to be columnar, granular, tabular or massive in its habit. Scheelite's refractive index  are both moderately high. These factors contribute to scheelite's high lustre and perceptible "fire", getting close to that of diamond.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn

5.Measure the crystal's specific gravity -- its weight compared with its volume. It is a good way to identify minerals. The specific gravity of wolframite is 7.40 grams per cubic centimeter. The specific gravity of scheelite is 6.01 grams per cubic centimeter. If you do not obtain access to such equipment, heft the sample in your palm. Both minerals should feel quite heavy for their sizes.

6.Place a magnet on a mineral thought to be wolframite. Wolframite includes iron, making it slightly metallic.

7.Shine a UV light on a mineral considered to be scheelite. Scheelite fluoresces bright white-blue under a UV light if it is very pure, and creamy yellow if it contains molybdenum.

8.Examine the other minerals that may have formed on your specimen. Wolframite often develops with topaz and quartz. Scheelite often develops with tremolite, tourmaline, topaz, vesuvianite, cassiterite, fluorite, diopside and apatite. What’s more, wolframite and scheelite are usually found together. 

Tungsten ore can be divided into tungsten concentrate and tungsten scheelite.
Processes to identify tungsten ore are examining the mineral, rubbing the mineral against a streak plate, dripping a small amount of diluted hydrochloric acid.

Tungsten is an element. It is a soft light grey or whitish metal. It has a quantity of practical uses, both in its pure form and as an alloy. However, how to identify them? Here are some instructions for you.

1. Examine the mineral. Wolframite ranges from black or greyish black to brown, is opaque and is slightly metallic. Scheelite is more varied.It can be tan to dark brown, golden to pale yellow, brownish yellow, reddish yellow, greenish, colorless or white. Its crystals can be transparent or opaque, and they have a shiny or glassy appearance.

2.Rub the mineral against a streak plate, a piece of plain white unglazed porcelain. Wolframite leaves a reddish brown color on a streak plate. Scheelite makes a white streak, which may be difficult to see.

3.Drip a small amount of diluted hydrochloric acid on the specimen. If it is scheelite, the acid will decompose it into a yellow powder.

4. Wolframite and sheelite each have a Mohs hardness of 4.5, so the nail will leave a mark on either.

2.Moving up on the popularity chart is the FindBass Mino Alewife. It also uses the DS Shad from FindBass, in the motor oil green flake color quite a bit.

3.Lunker City Rascal Worm, such as Green Weenie 3" and 4" Lunker City Slug-Gos for drop shot weight, especially in the spring.

You probably notice a theme in color schemes. Generally speaking, drop shotting is a finesse tactic designed to tempt neutral/negative or heavily pressured fish. Toward that end, low impact colors -- those that don't stand out from their surroundings and aren't likely to alarm or intimidate the fish -- are the most logical choices. It means that if it's not some variation on translucent brown and/or green, it's probably a really natural looking baitfish imitation.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

Selecting the proper bait for tungsten drop shot weight is easy if you remember that the technique is first and foremost designed to catch inactive and cautious fish. So, if you can use live bait-active minnows, leeches or nightcrawlers—do it. With artificials, use three- to five-inch thin, soft worms and scent-impregnated minnows. And nose hook your baits—natural and artificial alike—so they're free to wiggle. As for the best colours, simply match the hatch.

And some experienced anglers have sum up the three types of baits for tungsten drop shot weights.Just about any small, soft plastic lure will work for tungsten drop shot fishing. These baits work. Period. Haven't found any place they don't.

1. 4" Ringworm. A flat (IE., non-actiontailed) worm. Somewhere in the neighborhood of 2/3 of the bass can catch on the DS rig in the last 2 years have been caught on this worm.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

If you get what's called a drop shot sinker, like this one here, it has a little metal clamp thing at the top that will let you wedge your line onto it so you don't have to tie it. It saves a lot of time and hassle. Your leader should be about 15 inches long.

So now that we have the drop shot rigging, let's go ahead and put the plastic bait onto the hook. Take the worm or other drop shot bait and insert the hook point into the bottom of the bait right behind the nose of the bait. Come up through the bait about halfway and then start threading the hook out through the nose of the plastic bait until the barb just barely comes through the nose of the bait. And that's it! That's how you tie a drop shot rig. You'll notice that the worm will come off the main line perpendicular, just like this. That's it, simple stuff.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

The drop shot rig is one of the most effective finesse tactics that isn't limited to certain conditions or locations. We show you the proper way to tie the drop shot rig along with some sound advice and tips on nose hooking your bait, leader lengths and drop shot weights.

Let's talk about how to tie the drop shot rig. What you're going to need is your fluorocarbon line and your drop shot hook. We're going to tie a standard palomar knot, so take your line and insert it into the eye of the hook once and pull it through quite a bit, about 3 feet through. Now take that line and run it back through the eye to double up the line and pinch it tight just like this. Now tie your palomar knot and be careful not to twist the line when tying it. Lubricate the fluorocarbon line before cinching the knot down.

Now listen up, this is the important part. Take your tag end and come back down through the eye of the hook. This is important because this is what makes the hook ride upright and perpendicular to the main line. Now you should have a real long tag end, and that is what you are going to use to tie the rest of your leader with. Actually, you don't even need to tie the weight onto this leader.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

These fine tied tungsten weights come with a drop shot clip swivel attached. Perfect for drop shotting, dropper looping, and down shotting your baits and lures for largemouth bass, smallmouth bass, spotted bass, or any other species of fish you are after. All tied tungsten drop shot weights come in a Natural Finish, and in the most popular size options. Tied tungsten drop shot weights are excellent for getting a feel of the bottom. Best yet, Chinatungsten tied tungsten drop shot weights cost less than any other commercially made brand.

Tied tungsten drop shot weights are designed with over 90% tungsten to nickel ratio; making them hard, dense, small, and lead free. There are all of the properties that you have come to love about tungsten but at a more affordable price. Tied tungsten drop shot weights are affordable enough for everyone to use.




Tungsten Alloy Manufacturer & Supplier: Chinatungsten Online - http://www.tungsten-alloy.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Tungsten News & Tungsten Prices, WML Version: http://m.chinatungsten.com

The intersection angle between the rake face and fundamental plane of tungsten carbide turning tool is called rake angle. It main function is to sharpen the cutting edge of turning tool, reduce cutting deformation, save cutting labor, and facilitate the chip removal. The size of rake angle can affect not only the cutting deformation and cutting force, but also the roughness of workpiece surface and the intensity and service life of cutting tools.

The principles of choosing the rake angle of tungsten carbide turning tool are as follows:
I.    Choosing rake angle according to the workpiece materials. When the workpiece materials are relatively soft, larger rake angle should be adopted; when the materials are relatively hard, smaller rake angle should be adopted; when turning plastic materials, larger rake angle should be adopted; when turning hard brittle materials, smaller rake angle should be adopted.
II.    Choosing rake angle according to the precision requirements of workpieces being processed. When rough turning towards workpieces with hard surface is conducted, smaller rake angle should be adopted; when finish turning is conducted, in order to improve the roughness of workpiece surface, larger rake angle should be adopted.
III.    Choosing rake angle according to the material type of turning tool itself. When the turning tool material has poor intensity and toughness, smaller rake angle should be adopted but not vice versa.

Tungsten Manufacturer & Supplier: Chinatungsten Online - http://www.chinatungsten.com
Tel.: 86 592 5129696; Fax: 86 592 5129797
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tungsten & Molybdenum Information Bank: http://i.chinatungsten.com
Tungsten News & Tungsten Prices, 3G Version: http://3g.chinatungsten.com
Molybdenum News & Molybdenum Price: http://news.molybdenum.com.cn