It is reported that a few days ago, scientists successfully developed a 0.7nm tungsten selenide diode, which means that humans have finally broken the semiconductor 3nm process limit, and toward the development of semiconductor technology, and took a small step forward! Why do you say that? As you may be keen on semiconductors, semiconductor process technology is rapidly evolving with the development of smartphones from 28nm, 16nm, 10nm, 7nm, 5nm to 3nm. However, in this process, the miniaturization process of the semiconductor process is also slowing down due to the gradual failure of Moore's Law.

Can the tungsten copper alloy cover replace the copper type cover as the mainstream? After consulting the relevant literature, it is found that long and stable metal jet is essential to achieve the desired armor effect, and the medicinal mask material is the key to the formation of high-speed jets. Ground is the key to controlling the shape, size and quality of metal jets. Furthermore, according to the theory of penetrating fluid dynamics, the penetration depth of the metal jet is proportional to the square root of the jet length and material density. That is to say, the medicinal mask should form a longer and more stable metal jet, and the medicinal mask material should have the characteristics of high density, high sound speed and good shape.

HEAT is the abbreviation of the English "High-Explosive Anti-Tank" of the armor-piercing projectile. At the same time, most of them know that the armor-piercing projectile has another name: the hollow charge armor-piercing projectile or the gather-charged armor-piercing projectile. The chemical energy anti-armored ammunition developed based on the Monroe effect (concentration effect) is mainly used to damage armored targets such as tanks and armored vehicles. It is commonly found in tank guns, anti-tank guns, and anti-tank missiles. The hood is the "heart" of HEAT! However, in fact, the armor-type ammunition cover material is not only copper, nickel, and antimony.

Tungsten - the most refractory metal with the highest melting point. Tungsten is also an important strategic metal and is widely used in the military for its high density, high strength, high toughness, impact resistance, good shape, armor penetration and non-toxic environmental protection. Among them, tungsten alloys are used to manufacture various high-speed ammunition, especially armor-piercing projectiles, which can compete directly with depleted uranium bombs because of their extremely stable dynamic plastic deformation properties. As you may know, depleted uranium has become an environmental issue! Tungsten can also be used to protect or protect the outer casing of nuclear weapons materials. China's tungsten reserves are the world's number one!

With the rapid development of automotive industry, sulfur pollution caused by combustion of automotive fuels is becoming more and more serious. Strict sulfur content standards for gasoline and diesel have been formulated in various countries and regions of the world. Hydrodesulfurization (HDS) is usually used in industry to remove sulfides from gasoline and diesel oil, but for thiophene and its derivatives, due to the steric hindrance effect, the desulfurization effect is poor and the cost is high.

Thermal spraying technology can rapidly prepare a protective coating on the surface of the workpiece, giving the workpiece surface different properties such as wear resistance, corrosion resistance, wear reduction, sealing and so on. WC-based cermets with high hardness and toughness are widely used in aerospace, metallurgy, petrochemical, mechanical and other industries.

Tungsten resources are abundant and varied in China. At present, wolframite is decomposed by alkali and scheelite is decomposed by hydrochloric acid or boiled by soda. For quite a long time, experts at home and abroad generally believed that it was impossible to decompose scheelite by alkali (NaOH) in industry. Until Professor Li Honggui of Central South University put forward the hot-ball milling alkali decomposition process, which broke the convention.

Tungsten trioxide nanomaterials are often used to fabricate high-performance nanodevices because of their unique properties. One-dimensional nanomaterials have become a research hotspot of nanomaterials. At present, the preparation methods of WO₃ mainly include V-L-S method, L-L-S method, template method and so on. Template method has the advantages of low cost, suitable for large area ordered array units, and has become the mainstream.

Tungsten is a refractory metal with the highest melting point and lowest vapor pressure in all metals. It has been widely used in aerospace, power electronics and metallurgical industry. Recently, tungsten-based porous ceramics have attracted more and more attention from researchers at home and abroad.

Tungsten carbide is a well-known anti-wear material. For a long time, people have done a lot of research on tungsten carbide materials from practical applications, especially the research on its high-temperature tribological properties has achieved certain results. It is considered to be the most widely used. The development and application of the most promising metal-based composite materials have been used in aviation, aerospace, ordnance, automotive, agricultural machinery, electronics, sports and other industries.