With the increasing energy crisis in the world, it has become an urgent task to seek new and environmentally friendly energy sources.  The use of solar photocatalytic decomposition of water to produce hydrogen or oxygen is one of the effective ways to solve the problem of energy shortage and environmental pollution.  Among semiconductor photocatalysts such as TiO2, Nb2O5, ZnO and WO3, tungsten trioxide WO3 has received much attention as a typical n-type semiconductor photocatalyst.

Cadmium tungstate (CdWO4) is a scintillation crystal material. It has a high density (7.9g/cm3), high effective atomic number, high light output value, short afterglow (Afterglow) and energy resolution, and it does no deliquesce in air. It is widely application prospects in industrial CT, medical CT and oil logging.

It is well known that, alumina has the characteristics of high hardness, high melting point, good wear resistance and stable high-temperature chemical properties, and is widely used in industrial production. Due to its high hardness, it can be used in the abrasive grinding industry to produce abrasives, polishing powders, etc.; due to its high temperature chemical properties, it is the main raw material for refractory bricks, enamels, porcelain and artificial gems in the refractory and ceramic industries.

A-10 Thunderbolt II is a single-seat twin-engine attack aircraft made by US which  provides a support for ground forces, including attacking enemy tanks, armored vehicles, armed vehicles, and important ground targets.

Biomass can be regarded as a promising alternative energy source for petroleum. The key to convert biomass into important energy materials and basic platform compounds is to convert cellulose, an important component of biomass, into glucose by directional hydrolysis.

Tungstate red phosphor white LED is a new type of solid-state lighting electric light source (SSL). Its principle and structure are different from those of previous vacuum electric light sources such as incandescent lamp and fluorescent lamp. SSL light source has many advantages, especially high light efficiency, energy saving, long life and pollution-free. It has great application value and prospects.

The new preparation process of tungsten carbide-titanium carbide solid solution tungsten carbide-titanium carbide solid solution is a kind of compound carbide with high melting point, high hardness, high wear resistance, excellent anti-adhesion, oxidation resistance and wear resistance. It is widely used in cemented carbide products for mechanical processing. It is found that when carbide mixtures are added, it is difficult to control the carbon content because of the solid solution reaction during the sintering process. Therefore, carbide solid solution is usually added to cemented carbides in the production of cemented carbides.

SCR catalyst belongs to hazardous solid waste, which will seriously pollute the environment. Meanwhile, various valuable metals contained in the failed catalyst have not been recycled, resulting in a huge waste of resources. Therefore, the recycling of failed catalysts can not only solve the corresponding risk of environmental pollution, but also turn waste into treasure and make full use of resources.

Titanium-tungsten alloy has been widely used in microelectronics and biomedicine because of their excellent properties. The alloys formed by adding W to Ti have higher strength and hardness, and the ductility loss is very small. The non-magnetic W solid solution in Ti matrix can reduce the elastic modulus of Ti and increase its radiation resistance. In the field of electronic information, with the development of semiconductor VLSI industry, the elastic modulus of Ti can be reduced. With the development of titanium-tungsten alloy, high purity titanium-tungsten alloys can be used in electrode materials, diffusion barrier layers and wiring materials in the form of thin films.

When a semiconductor irradiates light with energy above bandgap, the electrons of valence band excite in the conduction band, generate holes in the valence band, and generate electrons in the conduction band. They have strong oxidation and reduction abilities respectively, and have redox effects on molecular species in contact with semiconductors. Such an action is called photocatalysis, and such semiconductors are called photocatalysts.